Page Comparison

Added

Special Tool that prevents and resolves Item Duplicates issues

In order to List/Relist Item on eBay, M2E Pro sends a request to eBay API which then returns a response with the Item ID which is provided for this Item on eBay. However, in some cases, when there are some eBay-related issues, network connection problems, etc., the request to List/Relist the Item is successfully proceeded on eBay, but the response is not sent back. Thus, there are no guarantee that the Item is listed/relisted on channel, which cause the next synchronization to attempt to list/relist the item anew. It might cause the duplicating of this Item on eBay and further restrictions related to the requirements of eBay Listing Policy.

To solve this issue and prevent the restrictions from eBay for such cases, the special Tool was implemented in current M2E Pro version. It detects the potential duplicates during the List/Relist actions and does not allow to proceed with the further process. It marks this Item as a Duplicate and does not allow it to be Listed/Relisted.

Once you click on Duplicate link, you will see a pop-up where you will be able to select one of the possible solutions:

• Ignore this message for the Item {eBay Item ID}
  It means that during the next attempt to list/relist your Item, the data will be sent to eBay to check whether the issue is still persist.

• Stop Item {eBay Item ID} on eBay
  It means that the Item will be automatically Stopped on eBay and you will be able to list your current Item without the further issues.

• Stop Item {eBay Item ID} on eBay and list/relist the current Item
  It means that the Item will be automatically Stopped on eBay and the new one will be listed/relisted.

Ability to use M2E Pro images URLs in Custom Item Description

Starting from the current M2E Pro version, the ability to add the URLs of the images into the Custom Description of your Item has become available.

You can insert Base Image URL along with the 12 Gallery Images' URLs. The URLs will be generated considering the Image settings provided in the Description Policy.

Also, please, bear in mind that only URLs (e.g. http://mymagento.com/media/catalog/product/image1.jpg) will be inserted into the Description value, but not an HTML code.

Improvements

The Variational Product cannot be listed to eBay if its Variational Attribute(s)/Option(s) contain the space at the start or at the end of its title

Currently different eBay marketplaces have different behavior considering the Variational Products where Variational Attribute title or Option title has a space at the beginning or in the end. For some marketplaces eBay system automatically removes this space from the title, which causes the further issues with the Products updating. Along with that, for other marketplaces eBay system does not make any changes.

Thus, to prevent any further issues with the Products updating on eBay, starting from the current version of M2E Pro the error will arise when you attempt to update such Variational Product.

It allows M2E Pro to guarantee that the further errors from eBay considering the difference in the Variational Attributes/Options will not arise.

Gallery Images adding to the Custom Description via CSS instead of JS (eBay active content deprecation announcement)

Recently eBay published an announcement which states that from 2017 the active content in the Items Description will be restricted.

M2E Pro Team checked the code which can be provided via the Extension to keep abreast and prevent any further issues related to this restriction. That is why, some changes were implemented into the mechanism of the Gallery Images provided in the Custom Description.

Now it is processing via HTML with CSS technologies which corresponds to the eBay instructions in this field.

Improvement of the Product main information updating during the Relist action running

As you probably know, the Synchronization Policy configurations contain a special option - Synchronize Data for the Relist Rules. This option is recommended to be enabled if you would like the Product information (Price, Quantity, etc.) to be updated on eBay during the relist running.

However, there used to be some issues when the Price and Quantity values were not accurately updated even if the Synchronize Data is set to Yes.

Thus, the logic of the option working was improved and now all the Quantity-, Price-related Product information including the data about its Variations will be sent to eBay, as logically Relist action should update the product data with the actual values.

Another URL is generated to link the Item on eBay

When the Item is listed/updated on eBay, its URL generation was changed in the current version considering changes which were made on eBay.

Now, the correct URL is generated and no related issues are observed.

Fixes

Items with Price 0.99 and less could not be Listed and Revised

In previous version there was an issue when the error arose for the Products with the Price value 0.99 and less, which did not allow updating them on eBay.

This issue is fixed in the current version and no related issues are observed now.

3rd Party Listings were not imported if there were a lot of Items on eBay

If your eBay Inventory contains a high number of Products, the 3rd Party Listings import might not work in some cases.

This problem is fixed and no related issues are observed in the current version.

Major fixes for Items with the enabled Out of Stock Control option

In previous versions, there were some issues related to the management of Items with the Out Of Stock Control option enabled. So, in some cases the Item can even be stopped despite the Out Of Stock Control enabled. It was caused by several misconfigurations which are solved in the new version:

• User Preferences

For some cases, when the Out of Stock Control option was enabled in the User Preferences section directly on eBay, M2E Pro does not have the information about it and can even stop the item despite the enabled option. Now, there were some major technical changes made to solve this issue. So, using the current version, M2E Pro will upload the information about the state (enabled/disabled) of the Out of Stock Control option from User Preferences settings and such Items will be managed properly.

• Enabled Out of Stock Control during the Revise action running

Under certain circumstances earlier, the issues can arise if the Out Of Stock Control option was enabled during the Items Revise. There were some changes made, so now the enabling of the Out Of Stock Control option during the Revise action is properly retrieved and the further Item management will work correctly.

• 3rd party Items with the Out of Stock Control enabled

During the 3rd party import, there is no way to upload all the item information from eBay. So, for some imported Items there were no information about the Out of Stock Control option state (enabled/disabled). It could cause the improper further Item updating. However, the latest version has a significant fix which allows importing the needed data and update the items then correctly.

• Listing Duration

If the Listing Duration differs from Good Till Cancelled, the Out of Stock Control will be considered as Disabled. Even if in your User Preferences, this option is enabled, it will not be taken into the account, if Duration is set, e.g. to 3 Days.

To sum up, the Items management with the Out of Stock Control option enabled was totally re-worked and is working properly in the current M2E Pro version.

Orders Synchronization could not work correctly sometimes if there are a lot of changes on eBay side

In some cases the Orders synchronization worked incorrectly if the the number of changes on eBay was high.

This problem is fixed and no related issues are observed in the current version.

Error "The Product was Listed as a Simple Product as it has limitation for Multi-Variation Items" during list item even if requirements are met

For some cases when you attempt to list the Variational Magento Product to eBay, the error "The Product was Listed as a Simple Product as it has limitation for Multi-Variation Items" arose even if the Item met all the requirements.

This issue is fixed in the current version and no related issues are observed now.

If an eBay Category in which the Item is Listed starts to require Product Identifier to be specified, all Product Data will be sent to the channel

In previous versions, errors might arise during Price/QTY Revise (Partial Revise) or Relist (with the Synchronize Data set to No) actions, in those cases when an eBay Category in which an Item was Listed started to require Product Identifiers (UPC, EAN, ISBN, etc). It was caused by the fact that during these actions only a basic set of the Product Data was sent to eBay (e.g. eBay Item ID and its new Quantity or Price), but the Product Identifiers were not sent. Due to this, the errors such as 'UPC is missing a value. Enter a value and try again.', 'EAN is missing a value. Enter a value and try again.', etc. could occur.

These errors could be received for an unlimited number of times, as there was no mechanism which would initiate a full Product Data update on the channel. Due to this, it was necessary to run Revise action for the affected Items manually to solve the issue. In case of a sizeable inventory, it could be rather difficult to identify which Item were affected and had to be manually updated. Moreover, execution of manual actions may be relatively time-consuming.

To resolve the problem, M2E Pro implemented the mechanism which automatically detects the affected Items and pushes the system to send all the Product Data to eBay for them.

Below you can find the steps of how it works:

• the Product Price is changed in Magento Product;
• Price Revise is launched;
• eBay Item ID and updated Price value is sent;
• eBay Category starts to require Product Identifier UPC to be specified;
• the error 'UPC is missing a value. Enter a value and try again.' arises;
• M2E Pro automatically detects that the Item is affected by this issue and sends all the necessary Product data to eBay.

As a result, the Item is updated on eBay with all the required data. This solution works for both Simple and Multi-Variational Products.

The item with 'Listed (Hidden)' status can not be listed again if eBay removed it earlier (60 days inactivity reason)

Basing on eBay logic - if the Item has a Listed (Hidden) status and was not modified for 60 days, it should be removed. Thus, when you tried to relist this Item using M2E Pro, the error arise as there is no according Item on eBay.

Now, M2E Pro has implemented a mechanism which run the List action automatically if previous Relist action was failed because of the issue described above.

Added

Ability to use Shipping Templates features

There are several modes available for working with Shipping settings on Amazon:

• Global settings with the ability to override the configurations for the particular Product(s) (Shipping Override Policy);
• Shipping Templates which allow identifying settings for the particular Product(s).

Starting from this version, M2E Pro supports both of the Amazon Shipping configurations.

So, you can select the Mode which is enabled for your Amazon Account in Seller Central in Amazon Integration > Configuration > Accounts > Shipping Settings tab.

Depending on the Mode selected in the Account configurations, the according Policy can be assigned on the Settings View Mode of the Listing.

The according Policies could be created in Amazon Integration > Configurations > Policies section.

In order to create the Shipping Template Policy, you should configure the according Template in your Seller Central first. It is caused by the fact that there are no ability to manage this settings via Amazon API. Then the name of the created Amazon Template you should provide in the Shipping Template Policy in M2E Pro to be able to apply it to your Amazon Items.

Fulfillment Center ID is provided in FBA Orders data

In the current M2E Pro version, new functionality for the FBA Orders management was added. So, now if the Orders information returned from Amazon contains a Fulfillment Center ID, it would be transferred into the Orders information available in Sell on Multi-channels > Sales section.

Ability to create new ASIN/ISBN in Canada Marketplace using Description Policy

The new M2E Pro version contains an ability to create new ASIN/ISBN for Amazon Canada Marketplace. Thus, the ability to create Description Policy was added either.

The Description Policy can either be used in order to update the product information on Amazon.

The detailed information about it you can find here.

Improvements

Many Performance improvements for synchronization with the Repricing Service

In previous versions, in some cases the Performance-related issues might arise for the cases when a lot of Products should be managed via Repricing Service.

New version contains some major Performance improvements which allows to work with the high number of Products without any issues, update Min, Max, Regular Prices, import Price values from Amazon without any issues.

There was a time-delay in Order status updating if there were a lot of List/Revise/Relist/Stop actions running

In case you have a lot of Products in your Inventory with the high number of changes in them, the number of required List/Revise/Relist/Stop actions which should be executed is also high. For Sellers with the high-loaded systems as described above, the time-delay in the updating of Orders' Statuses might arise.

In this M2E Pro version, this functionality was improved. The completely new, special programmatic part was implemented into the Extension, which allows to proceed the Orders updating and minimize the possible delay. So, the issue with the Orders' statuses updating delay should not arise.

Price values of the Products managed via Repricing Service will be updated every hour instead of one time a day

Previously the Price values displayed in M2E Pro for the Products managed via Repricing Service used to be updated once a day. It caused the difference in the actual Price value shown on Amazon for the Product and those value which you can see in your Listings.

To solve this issue, the frequent of the Price updating was increased and starting from 1.2.0 version the Price values are updated each hour.

Fixes

In some cases Products could be marked with Repricing Service icon even if they are not used by it

Previous test M2E Pro version has an issue when in some specific cases the Products can be marked with the Repricing Service icon even if they are not managed by it.

This problem is fixed and no related issues are observed in the version 1.2.0.

Sometimes all Products can be marked as Inactive (Blocked)

In some cases, if the number of Products in the inventory is quite high, the Products can be marked as Inactive (Blocked) and Synchronization of Channel Changes can be stopped.

This problem is fixed and no related issues are observed in the current version.

Adding a lot of Products to the Repricing Service from Listing Grid did not work correctly

In previous test versions there was an issue which occurred when you tried to add a high number of Products to the Repricing Service.

This problem is fixed and no related issues are observed in the version 1.2.0.

Full revise by Description Policy did not work, if change was performed on Definition tab

Under certain circumstances, the change made to the data placed on the Definition tab of the Description Policy was not properly reflected to Amazon and the Full Revise was not executed.

This problem is fixed and no related issues are observed in the version 1.2.0.

Synchronization was broken due to error "Call to a member function getOptions() on a non-object"

For the case when there were some changes made to Child Products, the error "Call to a member function getOptions() on a non-object" arose. It used to prevent the Items from being properly updated on Amazon.

This problem is fixed and no related issues are observed in the version 1.2.0.

In some cases Products could be marked with Repricing Service icon even if they are not used by it

Previous test M2E Pro version has an issue when in some specific cases the Products can be marked with the Repricing Service icon even if they are not managed by it.

This problem is fixed and no related issues are observed in the version 1.2.0.

Added

Ability to import Company Name to Magento Customer data which is created during Order creation process

Using a new version of M2E Pro, the Company Name will be either imported into the Customer data which is generated during the Magento Order creation process.

Improvements

The Orders cannot be imported from Channel if there were a lot of Orders updates made at the same time

If you have any tool or script in use which updated the Orders data, most probably, there are a high number of changes made at the same time to the Orders. Previously, M2E Pro used the method when it checked the date of the latest synchronization of Orders data and started the next import from this date. But using this method, the orders import might be stopped that was related to the amount of importing orders.

In this M2E Pro version, this functionality was completely re-worked. New, special programmatic part was implemented into the Extension, which allows to proceed the further Orders importing/updating. This new functionality is solving this issue for Sellers with a high activity, large inventories and high number of Orders.

The delay in the Orders downloading if there were a lot of List/Revise/Relist/Stop actions running

In case you have a lot of Products in your Inventory with the high number of changes in them, the number of required List/Revise/Relist/Stop actions which should be executed is also high. For Sellers with the high-loaded systems as described above, the time-delay in the importing/updating of Orders might arise.

In this M2E Pro version, this functionality was improved. The completely new, special programmatic part was implemented into the Extension, which allows to proceed the Orders updating and minimize the possible delay. So, the issue with the Orders updating/importing delay should not arise.

Grids Performance was increased for the correct working with a high number of Products

To make the work with M2E Pro grids easier, all of them are construct to have a flexible interface, variety of filter and soring options available, Advanced Product Filters, etc. But for the case when the grid contains a high number of Products (10 000 and more), the issues might arise and the time to load the grid can be increased. It is caused by the high number of dynamic data which should be displayed (price calculated values, quantity, etc.)

In this version, the concept of grids processing was completely re-worked in order to increase the Grids Performance. As a results the speed to load the Grids was increased up to 100 times.