Important: This is a legacy version of the documentation. Please visit the current documentation page.

M2E Pro Version - 1.2.1


Note: This version contains a lot of fixes for issues which used to occur. It increases the stability of running of your M2E Pro. Also, this release becomes fully compatible with all Magento 2.0.x. The previous versions were not compatible with older Magento versions because of implemented support for Magento Enterprise releases. Moreover, the Categories and Specifics data was updated for both eBay and Amazon Integrations. Plus, ability to apply kTypes for French Marketplace was implemented. And finally, for those Sellers who would like to use an ability to filter Products by Fulfillment and On Repricing parameter, such functionality was either added to this M2E Pro version.

Common Changes

Added

Ability to Migrate from Magento1 module v6.5.0.9

If you would like to move your store to Magento v2.x, you can easily do that using a Migration tool for the M2E Pro version 6.5.0.9.

Please, learn more about the Migration here.

Ability to filter by Product Types via Advanced Filter

Starting from the current version, the ability to filter Products by their types via Advanced Filter was added.

So, if you would like only particular Magento Products be displayed, you can easily set the filter parameter.

Improvements

Full Compatibility with Magento v2.0.x

As you may know, previously the support of Magento v2.x Enterprise edition was implemented into M2E Pro, but the earlier released Magento versions (which are not recommended for installation even by Magento Team) could not work properly.

Starting from the current M2E Pro version, all Magento versions 2.0.x are properly supported and well-functioning with M2E Pro Module installed.

However, the better choice is to install 2.1.x version of Magento which contains several thousands of fixes comparing to older Magento versions.

More logs records have become available for the 3rd Party Listings management process

Previously only major changes/actions were recorded in the logs for the 3rd Party Listings management. However, to make the logs be more informative and give a full information about the changes made to the 3rd Party Listings, they were improved.

So, using a 1.2.1 M2E Pro version, you can find much more records related to the 3rd Party Listings management in Logs&Events section.

Some Magento Attributes were hidden from the 3rd Party Listings' mapping options in Account configurations

The list of the Magento Attributes available in the list of the 3rd Party Listings' mapping options was improved. Some Attributes which cannot be used there were removed from the list.

So, now the configurations become easier.

Fixes

Tax amount was incorrectly set in Magento Order, if Buyer's Country was different from the Magento Base Country

Sometimes the Tax amount set in the Magento Order was incorrectly calculated in case the Country, the Buyer purchased it from, was different from your Magento Base Country.

This problem is fixed and no related issues are observed in current version.

Magento Order was not created when Quantity Reservation releasing does not revert the Product status back to In Stock

Previously, in case the Quantity Reservation took place and changed the Stock Status of the purchased Product to Out of Stock, in some specific cases, it might not be reverted back to In Stock when the Reserved Quantity is released.

In the 1.2.1 version, this issue is fixed and no related issues are observed now.

Fatal error used to occur during the Magento Product creation in case Auto Add/Remove Rules were set for the Listing

Under certain circumstances, the fatal error may occur during the Magento Product creation if in your Listing the Auto Add/Remove Rules were configured.

This problem is fixed and no related issues are observed in current version.

Error "Unknown Product type" might arise during synchronization process

Sometimes the error "Unknown Product type" might arise when Magento Variational Product was removed from the Magento Catalog.

This problem is fixed and no related issues are observed in 1.2.1 version.

Note: The better choice is to remove Products which are listed to Channels from Magento Catalog only after they are completely inactivated and removed from Channels to prevent any further issues. Magento Product acts a source role for adding/updating Items on Channels and when it is removed from Magento Database, M2E Pro loses the source data for Items' management on Channels which might cause problems. That is why it is strongly recommended to Stop/Remove these Items from Channels and only after that remove the according Magento Products from Magento Catalog.
Advanced Filter did not work correctly when "is not" condition was selected

In previous version if you set an Advanced Filter by any of its parameters and selected 'is not' condition, the incorrect results might be shown.

This problem is fixed and no related issues are observed in current version.

Incorrect  message was displayed, if the Magento Order creation was disabled in the Account settings

If the Magento Order creation is disabled in your Account settings, the incorrect message might be displayed when the Channel Order was imported and the attempt to Create Magento Order was made

This problem is fixed and no related issues are observed in 1.2.1 version.

eBay Integration

Added

eBay Categories and Specifics data was updated

Considering the recent changes of Categories/Specifics data on eBay, according data was updated in M2E Pro.

So, you should navigate to eBay Integration > Configuration > Marketplaces section and press Update All Now button to get the latest version of the Categories data for all eBay sites you are using.

Note: if you would like to add/edit the Categories or Specifics specified for the already listed Item, you will need to edit its configurations manually.

Fixes

Incorrect Buyer Email was shown on Magento Order Details Page

In some rare cases the Buyer email address displayed in the Magento Order Details were not correct.

Now, this issue is fixed and no related problems are observed.

Orders cannot be imported from Channel if there were a lot of Orders updates made at the same time

If you have any tool or script in use which updated the Orders data, most probably, there are a high number of changes made at the same time to the Orders. Earlier, M2E Pro used the method when it checked the date of the latest synchronization of Orders data and started the next import from this date. But using this method, the orders import might be stopped that was related to the amount of importing orders.

Then in previous versions, this functionality was significally re-worked and new, special programmatic part was implemented into the Extension, which allows to proceed the further Orders importing/updating.

In this M2E Pro version, this mechanism was improved either and related to it fixes were added.

Filtering by Channel Order ID did not work correctly, if In-Store Pickup feature is enabled

In case you used an In-Store Pickup feature for your Account, the Filter by Channel Order ID did not show the correct results.

Now, this issue is fixed and no related problems are observed.

Incorrect Currency can be shown for "Online Price" column in 3rd Party Listings Grid

Sometimes the incorrect currency can be shown for Online Price value in the 3rd Party Listings Grid.

This problem is fixed and no related issues are observed in 1.2.1 version.

Incorrect value can be shown in "Available QTY" column of 3rd Party Listings Grid

Sometimes the incorrect quantity value can be shown for Available QTY in the 3rd Party Listings Grid.

This problem is fixed and no related issues are observed in 1.2.1 version.

The error "Undefined index: variations" might arise during synchronization process

If you initially listed your Product as Simple and then it was changed to Variational Product, the error "Undefined index: variations" might arise during synchronization process.

The according fix is implemented into the current version and no related issues are observed now.

Amazon Integration

Added

Amazon Categories data was updated

Considering the recent changes of Categories and related to them data on Amazon, according data was updated in M2E Pro.

So, you should navigate to Amazon Integration > Configuration > Marketplaces section and press Update All Now button to get the latest version of the Categories data for all Amazon Marketplaces you are using.

After that you will be able to apply the latest Categories data for your Items via Description Policy.

Improvements

The 'Yes/No' filters were added for Fulfillment and On Repricing options in the grid

Starting from this version the filters by Fulfillment and On Repricing options were improved in Listing grid.


So, in the QTY column of the grid you can set Products with MFN or AFN fulfillment should be displayed.

Along with that, you can filter the Products by their state in the Repricing Service. Thus, if the Product and all its Variations are managed via the Repricing Service, it will be shown in search results if you set Yes for On Repricing filter. But in case your Variational Product has any of the Variations which is not currently controlled by the Repricing Service, it will be displayed in both cases - if Yes or No value selected.

Fixes

Specifics values specified in Description Policy were not stored if "Save and Close" button was pressed

In some cases, if you add/edit the Specifics provided in the Description Policy and then pressed Save and Close button, the changes were not stored.

This problem is fixed and no related issues are observed in 1.2.1 version.

Incorrect Price values might be displayed for Products managed via Repricing Service in the grids

Sometimes the Price values which were displayed in the grids might be not actual for Products managed via Repricing Service.

This problem is fixed and no related issues are observed in the current version.

Wrong Price values might be set for Products that have a Disabled status in the Repricing Service in the grids

In some cases, for Products that have Disabled status in the Repricing Service, the Price value displayed in the grid might be not correct.

However, the according fix is implemented into the current version and not related issues are observed now.

Sometimes the Items might become broken if Variations were added to the according Magento Product

In case you listed initially a Simple Magento Product to Amazon, but then added Variations to it in your Magento catalog, the issue might arise. 

In the current version the needed fix to correctly process such Magento Product modifications was added and no related issues are observed now.

Listing Products were not removed from Listings, if according Magento Product was removed

Under certain condition, the Product was not removed from the Listing if according Magento Product was removed from the Catalog.

Now this issue is fixed and no related problems are observed.

Incorrect Status was shown for all Variational Products in Search Grid

Sometimes the incorrect Status might be shown for the Variational Products in Search Grid.

This problem is fixed and no related issues are observed in 1.2.1 version.

New Child Product cannot be added for Parent Product in Manage Variations pop-up

In some rare cases, there was no ability to add new Child Product to the Parent Product in Manage Variations pop-up.

In the current version the needed fix was added and no related issues are observed now.